home *** CD-ROM | disk | FTP | other *** search
- AUDIOVOX CTX1500, 2500, 4000, 5000, BC410, 55, SP85, TRANS 410.
-
- NOTES: These are single NAM units.
- The ESN prefix is 138 decimal, 8A hex (Toshiba)
- You MUST know the lock code to program this unit, see below for
- "back door" programing methods.
- Audiovox: 516-231-6051/213-926-7758
-
- NAM programing:
-
- 1. With the power turned on enter N N N FUNC # 1, where NNN is the three
- digit lock code. The manufacturers default is 000
-
- 2. The # key increments the step number.
-
- 3. The * key decrements the step number.
-
- 4. STO enters the data for each step.
-
- 5. You MAY directly access any step by pressing RCL followed by the step
- number.
-
- 6. FUNC SND completes programming.
-
- 7. FUNC CLR exits programming mode.
-
- PROGRAMING DATA:
-
- STEP# #OF DIGITS/RANGE DESCRIPTION
-
- 01 10 DIGITS MIN (AREA CODE & PHONE NUMBER)
- 02 3 DIGITS LOCK CODE
- 03 00000 - 99999 SYSTEM ID
- 04 00 - 15 ACCESS OVERLOAD CLASS
- 05 00 - 15 SYSTEM ID (10 FOR USA)
- 06 0 OR 1 LOCAL USE MARK
- 07 0 OR 1 MIN MARK
- 08 0333 OR 0334 INITIAL PAGING CHANNEL
- 09 0 OR 1 PREFERRED SYSTEM
- 10 4 DIGITS STATION CLASS MARK
- 11 8 BINARY DIGITS FUNCTION 1, SEE NOTE 1 BELOW
- 12 8 BINARY DIGITS FUNCTION 2, SEE NOTE 2 BELOW
- 13 00 TO 31 HOURS POWER OFF TIMER (CTX 4000 ONLY)
- 14 000 TO 255 SECS NO CHARGE AIR TIMER DELAY
- 15 3 DIGITS CALL TIMER RESET CODE
- 16 - 20 00000 - 99999 SIDH INHIBIT # 1 THRU # 5
- 21 - 25 NOT USED FUTURE USE
-
-
- NOTES:
-
- 1. This is an eight digit binary field.
-
- 10000000 = CALL TIMER BEEP
- 01000000 = AUTO LOCK
- 00100000 = AUTO SYSTEM REDIAL
- 00010000 = CALL RESTRICTION
- 00001000 = 32 DIGIT DIALING CAPABILITY
- 11111000 = ALL OF THE ABOVE
-
-
- 2. As above but options are:
-
- 10000000 = HANDS FREE
- 01000000 = CONTINUOUS DTMF
- 00100000 = REPERTORY DIALING
- 00010000 = HORN ALERT
- 00001000 = ALLOWS 911 CALLING WHEN UNIT IS LOCKED
- 01101000 = ALL OF THE ABOVE
-
-
- A/B SYSTEM SELECT:
-
- FCN 0 4 DISPLAYS CURRENT MODE,
- FCN 0 0 = PREFERRED/NON-PREFERRED,
- FCN 0 1 = PREFERRED ONLY,
- FCN 0 2 = HOME ONLY
- FCN 0 3 = NON PREFERRED ONLY,
-
- "BACK DOOR" PROCEDURES:
-
- We cannot guarantee the accuracy of these procedures, USE CAUTION!
-
- SP 85
- The lock code can be reset to 000 be shorting pins 6 and 17 on the handset
- control conector.
-
- CTX SERIES
- Short pins 6 an 17 on the data cable, turn power on and enter 000 FUNC # 1.
-
- TRANS 55 AND BC 55
- Ground pin 1 of the six pin connector next to the modular jack on the
- tranceiver. Looking at the tranciever with the modular jack to the right
- of the six pin connector, pin one is bottom right.
-
- LOCK: Press LOCK. UNLOCK: Enter three digit code.
-
- SYSTEM SELECT: F 0 4 shows current mode. F 0 0 = Pref/Non pref, F 0 1 = Pref
- only, F 0 2 = Home Only, F 0 3 = Non pref only.